Manufacturer and service provider of creasing matrixYutian haoyu Printing Equipment Manufacturing Co., Ltd.

中文

139-3154-3095

Location： Home > Introduction to creasing matrix How to choose the correct creasing matrix

Selection method of Haoyu brand creasing matrix

Introduce

Measurement method of corrugated paper thickness

29c7274d1aa683f

16558829970d3fa1

Selection table of cardboard (Standard height of die cutter setting at 23.8mm)

Weight of cardboard (gram)	Thickness of cardboard	Height of creasing line（mm）						Regular Haoyucreasing line
Weight of cardboard (gram)	Thickness of cardboard	23.50	23.40	23.20	23.20	23.10	23.00	23.24	22.9
200	0.28mm	0.3×1.0	0.4×1.0					0.5×1.0
250	0.35mm	0.3×1.2	0.4×1.2	0.5×1.2				0.5×1.2
300	0.42mm	0.3×1.3	0.4×1.3	0.5×1.4				0.5×1.4
350	0.50mm		0.4×1.4	0.5×1.5	0.6×1.5			0.5×1.5
400	0.56mm			0.5×1.6	0.6×1.6			0.5×1.6	0.8×1.6
450	0.63mm			0.5×1.7	0.6×1.7	0.7×1.7			0.8×1.7
500	0.70mm					0.7×1.7	0.8×1.7		0.8×1.7
Note: The above specifications can only be used as recommendations, among which the gray part are most preferred.

Example of paper paperboard: the thickness of the paper paperboard is 0.52mm, the thickness of tthe creasing matrix is 0.71mm
According to the calculation method: A=0.52≈0.5mm B=0.52x1.5+0.71=1.49≈1.5mm The most suitable size of creasing matrix should be 0.5x1.5

Selection table of corrugated cardboard (Standard height of die cutter setting at 23.8mm)

corrugated paper	Thickness of corrugated cardboard after pressing flat	Height of creasing line	Select creasing line(1.05 mm thicknessof creasing line)	Select creasing line(1.42 mm thickness of creasing line)
E-坑 E-pit	0.65mm	23.10mm	0.7×2.3	_______
E-坑 E-pit	0.75mm	23.00mm	0.8×2.5	_______
B-坑 B-pit	0.85mm	22.90mm	0.8×2.7	0.8×3.2
B-坑 B-pit	0.95mm	22.80mm	1.0×3.0	1.0×3.5
C-坑 C-pit	1.05mm	22.70mm	1.0×3.2	1.0×3.5
C-坑 C-pit	1.15mm	22.60mm	_______	1.0×4.0

Example of corrugated paper: the thickness of corrugated paper is 0.75mm, and the thickness of the creasing matrix is 1.05mm
According to the calculation method: A=0.75≈0.5mm B=0.75x2.0+1.05=2.55≈2.5mm The most suitable size of creasing matrix should be 0.8x2.5